Troubleshooting - Petsafe ST-70 Manuel D'utilisation Et De Dressage

My pet is not responding when I
press a button.
The Receiver Collar will not
turn on.
The Receiver Collar is not
responding to the Remote
Transmitter.

Troubleshooting

• Check to see if the Receiver Collar has been
• If your range has reduced from the fi rst
• You can verify the Receiver Collar is delivering
• Increase the Static Stimulation Level. Refer to
• Make sure the Receiver Collar's Contact
• Check that the batteries have been installed
• Verify the Receiver Collar is on.
• If the Indicator Light does not come on
• If the fi rst two solutions did not resolve your
www.petsafe.net
turned on.
time you have used it, please check to see
if the batteries are low in either the Remote
Transmitter or Receiver Collar.
stimulation to your pet by using the Test Light
Tool enclosed in your kit. Please refer to the
"Test Light Instructions" section for details.
"Find the Best Static Stimulation Level For Your
Pet" for more information.
Points are placed snugly against your pet's
skin. Refer to "Fit the Receiver Collar" for
more information.
properly. See "Prepare the Receiver Collar".
when any button is pressed on the Remote
Transmitter, ensure that the batteries are
inserted properly.
problem, see "To Pair the Receiver Collar and
the Remote Transmitter".
15