2- Mounting The Cassette Without False Ceiling; 3- Mounting The Cassette With False Ceiling - Saunier Duval 2-035 AK Manuel D'installation

4- INSTALLATION OF THE UNIT

4.2.2- Mounting the cassette without false ceiling

The necessary installation measures can be
consulted in section 4.
1 Draw the positioning of the securing points
according to the measurements indicated and
then mount the fasteners in the designated
place.
2 Adapt the length of the fasteners to the
required measurements. (Diameter of the ring
rod M 10).
3 Secure each support with a fastening nut and a
locknut below the angle of the cassette support
and a fastening nut above the support angle.
4 Hitch up the cassette without tightening the
locknuts.
5 Adjust the cassette by adjusting the lower
fastening nuts mounted on ring rods / on the
ring hooks, ensuring the cassette is horizontal
and the height is correct.
6 Then, tighten the fastening nut and the
locknut.

4.2.3- Mounting the cassette with false ceiling

The necessary installation measures can be
consulted in section 4. Open the false ceiling to
the measurements indicated for the cassette.
1 Draw the positioning of the securing points
according to the measurements indicated and
then mount the fasteners in the designated
place.
2 Adapt the length of the fasteners to the
required measurements. (Diameter of the ring
rod M 10).
3 Secure each support with a fastening nut and a
locknut below the angle of the cassette support
and a fastening nut above the support angle.
4 Lift the cassette, leaning it slightly, where
necessary, to insert it into the opening in the
false ceiling.
5 Hitch up the cassette without tightening the
locknuts.
6 Adjust the cassette by adjusting the lower
fastening nuts mounted on ring rods / on the
ring hooks, ensuring the cassette is horizontal
and the height is correct.
Bar
Support
Body
Nut
Ceiling
8
T-bar
Hook
Panel