Stainless steel hose clamp.
T of 135° with outlet.
Wooden ground.
Non flammable floor protection.
Stainless steel flexible tube.
Rigid flexible pole adapter.
Anti blow-back seal.
Minimum 200mm.
It must exceed roof height by 1 metre.
If the tube over 8 m in length, the next larger
size will be used.
When installing a flexible tube for gas outlet, be careful that this is not in contact or close to the circuit board
or combustible material.
KEYBOARD ASSEMBLY, POWER CABLE, ROOM SENSOR AND WiFi ANTENNA CONNECTION.
An Ecoforest box is placed inside the fireplace. It contains the user manual, the installation and maintenance
manual, a keyboard and keyboard support (not for insert stoves), a WiFi antenna, a power cable, a room sensor and
a cleaning brush.
Place keyboard and keyboard holder.
Power connection ~230/240V - 50Hz.
Room sensor.
Screw the Wi-Fi antenna to the docking station. This magnet base must be stuck to the back of the boiler.
Once assembled, the unit has to remain in a vertical position.
Antenna.
Magnet connection base.
38
Drawing 16
Drawing 17
Drawing 18