Jotul Scan Andersen 4-5 Manuel D'installation Et D'utilisation page 38

ENGLISH
4.7 Smoke outlet
The product has been prepared for a top outlet by the
manufacturer.
Fitting a smoke outlet with a top outlet
Fig. 5
1. Attach the loose smoke outlet (Fig. 5-1) which is inside the
ash pan to the outlet using the retaining clips and screws
from the service package.
2. Screw the safety fi tting (Fig. 5-2) crosswise in the outlet collar
to prevent damage to the baffl e and exhaust defl ector when
sweeping the chimney.
Fitting a smoke outlet with a rear outlet
Fig. 6
1. Lift the baffl e (Fig. 6 - 1) up carefully.
2. Remove the pins (Fig. 6 - 2).
3. Ease the baffl e out.
38
2
1
1
Fig. 7
2
1. Lift the exhaust defl ector (Fig. 7 - 1) up carefully.
2. Remove the pins (Fig. 7 - 2).
3. Ease the exhaust defl ector out.
Fig. 8
1. Unscrew the outer heat shield (Fig. 8 - 1).
2. Remove the knockout.
Fig. 9
1. Unscrew the inner heat shield (Fig. 9 - 1).
2. Remove the knockout (Fig. 9 - 2).
1
2
1
2
1