Quick Start - ECOVACS ROBOTICS DEEBOT M82 Manuel D'instructions

3.2 Quick Start

Charging Dock Placement
1
Connect the Power Adapter to the Charging Dock.
Plug the Charging Dock in.
Power ON
2
Turn the robot's Side Power Switch to
the ON position. "l" indicates ON and "O"
indicates OFF.
* DM82 is powered ON when the AUTO
3
Charge DM82
Place DM82 on the Charging Dock making
sure the Charging Contacts on DM82
and the Charging Dock Pins make a
connection.
Charge DM82 for at least 4 hours before
* The AUTO Mode Button on the robot
and glows a continuous GREEN when it
is fully charged.
3. Operating and Programming
9
EN