Transport, Packaging And Storage - WIKA A-10 Mode D'emploi

4. Transport, packaging and storage

4. Transport, packaging and storage
4.1 Transport
EN
Check the pressure transmitter for any damage that may have been caused during transportation.
Obvious damage must be reported immediately.
4.2 Packaging and storage
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in installation site, sending for
repair).
Permissible conditions at the place of storage:
Storage temperature: -40 ... +70 °C
■
Humidity: 45 ... 75 % relative humidity (no condensation)
■
8 WIKA operating instruction pressure transmitter, model A-10