Microwave Functions - ETNA CM444RVS Mode D'emploi

OPERATION

Microwave functions

• Warning! Microwave heating of liquids (such as water) can result
in delayed eruptive boiling. This means that liquid starts boiling
without you seeing any movement. Once removed from the oven,
the liquid can start to boil rapidly and spatter out of the cup with
the risk of injury. The effect of eruptive boiling can be eliminated by
placing a plastic / glass spoon in the fluid before cooking it in the
microwave oven.
• Warning! Take care with baby food and jars:
▷ Caution! The contents of feeding bottles and baby food jars
must be stirred or shaken after heating.
▷ Caution! Carefully check the temperature of the contents before
consumption, in order to avoid burns.
Warning! Utensils can be hot after use in the microwave oven!
1. Press the on/off button to activate the microwave function.
'01:00' is blinking in the display and the microwave icon appears in
the display.
2. Turn the selection button to set the cooking time. The max.
cooking time depends on the power that has been set.
3. Press the power/weight button to adjust the microwave power.
'900' is blinking in the display.
4. Turn the selection button to set the microwave power (between
100 W and 900 W). Press the power/weight button again to
confirm the setting or wait for the power to stop blinking in the
display.
You will hear a beep.
5. Press the start/pause button to start the cooking process.
When the cooking process is ready, you will hear 5 beeps. The fan
continues to operate for some time and then stops automatically.
If you do not press the start/pause button, the combi microwave
oven switches itself off automatically after 5 minutes.
EN 13