ETNA CM444RVS Mode D'emploi page 95

OPERATION
• After preheating, you will hear an alarm and the preheating symbol
will blink.
• Put the dish on the glass baking tray, and insert it in the oven on
level 1. Press the start/pause button.
• The programmes with ** only use the microwave function.
1. Press the on/off button to activate the microwave function.
'01:00' is blinking in the display and the microwave icon appears in
the display.
2. Turn the function knob three positions (P01) or four positions (d01)
to the right.
Time, weight, the first number of the automatic programs and the
defrost icon/automatic cooking program icon are shown in the
display.
3. Turn the selection knob to the right to choose an automatic
cooking program. If the symbols stops blinking, the chosen
program has been activated. You can go back one step by turning
the function knob one position to the left.
4. Press the power/weight button to set the weight.
The weight is blinking in the display.
5. With the selection knob you set the right weight. Press the power/
weight button again to confirm the setting.
The weight that can be set depends on the program that you have
chosen.
Press the start/pause button to start the automatic cooking
program.
The programmes with a * are preheated. During preheating, the
cooking time pauses and the preheating symbol is on. After
preheating, you will hear an alarm and the preheating symbol will
blink. Put the dish on the glass baking tray, and insert it in the oven
on level 1. Press the start/pause button.
When the cooking program is ready, you will hear 5 beeps. The fan
continues to operate for some time and then stops automatically.
If you do not press the start/pause button, the combi microwave oven
switches itself off automatically after 5 minutes.
EN 17