Microwave Functions - ETNA cm644ti Mode D'emploi

OPERATION

Microwave functions

• Warning! Microwave heating of liquids (such as water) can result
in delayed eruptive boiling. This means that liquid starts boiling
without you seeing any movement. Once removed from the oven,
the liquid can start to boil rapidly and spatter out of the cup with
the risk of injury. The effect of eruptive boiling can be eliminated by
placing a plastic / glass spoon in the fluid before cooking it in the
microwave oven.
• Warning! Take care with baby food and jars:
▷ Caution! The contents of feeding bottles and baby food jars
must be stirred or shaken after heating.
▷ Caution! Carefully check the temperature of the contents before
consumption, in order to avoid burns.
Warning! Utensils can be hot after use in the microwave oven!
1. Press the microwave function button to activate the microwave
function.
'900' flash in the display and the microwave function icon is visible.
If no operation in 10 seconds, the current power will be confirmed
automatically.
2. Press the Settings button to set the microwave power.
3. Use the selection buttons to set the microwave power (between
100 W and 900 W).
4. Press the Settings button again to confirm or wait until the power
stops flashing in the display.
You will hear an audible signal.
5. Press the clock button to set the cooking time.
6. Use the selection buttons to set the cooking time.
The maximum cooking time depends on the power you have set.
7. Press the start button to start the cooking process.
When the cooking process is complete you will hear 5 audible
signals. The ventilator will continue to run for a while before
switching itself off.
If you do not press the start button, the combi microwave oven
switches itself off automatically after 15 minutes.
EN 13