Microwave Functions - ETNA CM450ZT Mode D'emploi

OPERATION
Note
See 'Cooking tips' for information about food.

Microwave functions

Warning!
Microwave heating of liquids (such as water) can result in delayed eruptive boiling. This
means that liquid starts boiling without you seeing any movement. Once removed from
the oven, the liquid can start to boil rapidly and spatter out of the cup with the risk of
injury. The effect of eruptive boiling can be eliminated by placing a plastic / glass spoon
in the fluid before cooking it in the microwave oven.
Warning!
Take care with baby food and jars:
• The contents of feeding bottles and baby food jars must be stirred or shaken
after heating.
• Carefully check the temperature of the contents before consumption, in order to
avoid burns.
Warning!
Utensils can be hot after use in the microwave oven!
EN 14
1. Touch the microwave key to activate the microwave function.
'01:00' flashes in the display. '900' and the microwave function icon
are visible.
2. Use the selection dial knob to set the cooking time.
3. Touch the microwave key. The power indication will flash in the
display.
You will hear an audible signal.
4. Use the selection dial knob to set the power level.
5. Touch the start / pause key to start the cooking process.
When the cooking process is complete, a signal sounds. The
ventilator will continue to run for a while before switching itself off.
If you do not touch the start / pause key, the combi microwave oven
switches itself Off automatically after 15 minutes.