Cola EASY CRONO HR Manuel D'installation, D'utilisation Et D'entretien page 34

1.4 Technical description
The stove works exclusively on pellets, providing healthy and safe heat in the room. The stove's automatic control
systems guarantee optimum heat output and complete combustion; there are also safety systems to guarantee safe
operation for the stove parts and for the user.
When correctly installed, the unit works in any outside climatic conditions, and in any case in critical conditions
(strong wind, frost, etc.) the safety systems can cut in, shutting down the stove.
Structure
Combustion chamber
Heat output nominal - reduced
Hourly consumption Nom. output- Red. output
Efficiency Nom. output- Red. output
Fume outlet temperature Nom. output- Red. output
CO emissions with 13% O2
Flue gas flow
Dust emissions
Flue draught
Fume outlet pipe
Air inlet pipe
Electrical power supply
Electrical power input
Min. safety distance rear - right/left side - floor
Dimensions (mm)
Stove weight
Hopper capacity
Max. heatable volume
* Pellet consumption can vary according to the type of pellets used and their preservation.
** Considering 35 W/h per m3. The building's energy requirement can vary according to the
insulation, type and climatic zone.
Steel, cast iron and majolica
steel and cast iron
Nom. output 9.29 kW
Nom. Output 2.2 kg./h*
Nom. output 89.26 %
Nom. output 182.2° C
Nom. output 0.01 %
Nom. output 6.5 g/s
Nom. output 6.1 mg/m
10-14 Pa
Ø 80 mm
Ø 50 mm
230V/50 Hz
420 W max. in lighting stage
120 W for normal operation
200 - 300 - 0 mm
H x W x D = 990 x 582 x 499 mm
98 kg
31 litres (~22 kg)
3
212 m **
34
Red. output 2.58 kW
Red. output 0.57 kg./h.*
Red. output 95.7 %
Red. output 80.2° C
Red. output 0.02 %
Red. output 2.2 g/s
3
EASY CRONO HR