Cleaning And Care - WMF Lineo Mode D'emploi

Cleaning and care

Disconnect the mains plug immediately after use.
Always clean the blender (5) immediately after use to prevent dried-on leftovers
from damaging the bearing of the blender (5).
For preliminary cleaning, let the blender run for a short period time in a recepta-
cle containing hot water.
The blender (5) is locked into the appliance during use and can only be removed
by pressing the release button (4). The blender (5) can now be removed.
For safe storage, put the purée rod (5) in the protective cap (6).
Clean the accessory immediately after use so that dried-on residual food cannot
damage the accessory.
Do not use any abrasive cleaning agents.
Dishwasher-safe
Drive unit
Purée rod (5)
Protective cap (6)
Measuring jug
with anti-slip
base (7)
Upper part
with integrated
adapter (8)
Container (9)
Stainless steel
knife (10)
Anti-slip base
(11)
Adapter (12)
Whisk (13)
Milk frother (14)
Can be rinsed Wipe with a
under running damp cloth
water
19