WMF Lineo Mode D'emploi page 17

▪ Now connect the mains plug to the socket.
▪ Hold the appliance firmly in one hand and press the on switch (2)
motor will begin to operate.
▪ As soon as your foodstuff has reached the desired consistency, and after a
maximum of one minute, release the on switch (2)
Alternatively you can also press the turbo button (3)
ase the speed of the appliance.
▪ Wait until the motor and the gadgets have come to a stop, then remove the
blender (5) from the appliance.
Always remove the mains plug from the socket before placing the appliance
on a suitable surface.
Chopper
With the chopper, you can chop and mince, onions, fruit, vegetables, hard cheese,
herbs, nuts and meat.
▪ Remove the protective cover from the knife.
Place the stainless steel knife (10) into the receptacle at the bottom of the
container (9).
Turn the stainless steel knife (10) until it slides to the bottom of the recepta-
cle.
▪ Attention: The blades are sharp. For this reason, always replace the protective
cover when the blades are not in use.
Place the food in the container (9) so that it is no higher than the MAX mark-
ing and place the upper part with the integrated adapter (8) on top.
For better stability, attach the rubber anti-slip base (11) to the bottom of the
container (9).
Attention: Fill with a maximum of 200ml of thin liquid food.
▪ Insert the drive unit of the hand-held blender on the adapter (8) integrated
into the upper part. Press the coupling of the drive unit onto the adapter (8)
until the container (9) with the upper part audibly clicks into place and is
therefore locked.
There may be no gap between the drive unit and the adapter (8).
▪ Use the rotary ring (1) to select the desired speed. Use a higher speed for
harder food.
▪ After connecting the mains plug, press the on
bursts until you achieve the desired result. Hold the container (9) with one
hand during the process. Alternatively, you can also press the turbo button (3)
to process. The device then operates at full speed.
▪ Once the desired result is achieved, wait until the motor and knife stop and
disconnect the mains plug.
▪ Loosen the upper part from the drive unit by pressing the unlock button (4).
You can then remove the upper part (8) from the container (9) and carefully
remove the knife.
▪ Do not use the container (9) for storing food.
. The
.
, which will incre-
switch (2) in multiple short
17