en-us Alarm
MAlarm
D oor alarm
A l a r m
If the appliance door is open for a while, the door
alarm switches on.
Close the door or press alarm button.
■
The warning signal is switched off.
Temperature alarm
If the freezer compartment becomes too warm, the
temperature alarm is switched on.
9
CAUTION
DURING THE THAWING PROCESS, BACTERIA
MAY DEVELOP AND SPOIL THE FROZEN
ITEMS
Do not refreeze partly or completely thawed
food.
Refreeze food only after cooking. The frozen
items should no longer be stored for the
maximum storage period.
The alarm may activate itself without risk to the
Note:
frozen food in the following situations:
The appliance is switching on.
■
Large quantities of fresh food are being placed
■
inside.
The freezer compartment door has been open
■
too long.
Indicating warmest temperature and switching off
warning signal:
Press alarm button.
■
The display briefly indicates the warmest
temperature reached in the freezer compartment.
Then the display indicates the set temperature
again.
From this time on the warmest temperature is
recalculated and saved.
The alarm button remains lit until the set
Note:
temperature has been reached again.
14
o Home Connect
T his appliance is Wi-Fi-capable and can be
H o m e C o n n e c t
controlled remotely using a mobile device.
Wi-Fi is a registered trade mark of the Wi-Fi
Note:
Alliance.
In the following cases, the appliance functions like a
refrigerator without a network connection and can
still be operated manually via the controls:
The appliance is not connected to a home
■
network.
The availability of the Home Connect function
■
depends on the availability of Home Connect
services in your country. Home Connect services
are not available in every country. You can find
more information on www.home-connect.com.
Please observe the safety information in this
Note:
instruction manual. Ensure that this is also observed
if you operate the appliance via the Home Connect
app and are not at home when doing so.
~ "Important safety instructions" on page 3
Follow the instructions in the Home Connect app as
well.
Setting up Home Connect
Notes
Take note of the Home Connect supplementary
■
sheet, which is available for download at http://
www.bosch-home.com together with the
instructions. To do so, enter the E-number of your
appliance in the search field.
After switching on the appliance, wait at least two
■
minutes until the internal device initialization
process has been completed. Only then start
setting up Home Connect.
To be able to make settings with Home Connect,
■
you need to install the Home Connect app on
your end device.
To do this, please take note of the documentation
that has also been supplied from Home Connect.
Follow the steps specified by the app to make the
settings.