Switching The Appliance On; Setting The Temperature; Alarm Function - Bosch KSV Serie Mode D'emploi

Switching the
appliance on
Fig. "
Switch on the appliance with the
On/Off button 1.
The temperature display 4 indicates the
set temperature.
The appliance begins to cool. Light is
switched on when the door is open.
We recommend a factory setting of
+4 °C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.
Operating tips
While the refrigeration unit is running,
■
water droplets or a thin layer of ice
may form at the rear panel of the
refrigerator. This is nothing unusual.
It is not necessary to scrape off the
frost or wipe off the water droplets.
The rear panel defrosts automatically.
The condensation collects in the con-
densation channel and is carried to
the refrigeration unit where it evapo-
rates.
If the air humidity is high, condensa-
■
tion may form in the refrigerator com-
partment, especially on the glass
shelves. If this is the case, pack or
wrap the food and select a lower tem-
perature in the refrigerator compart-
ment.
All manuals and user guides at all-guides.com
Setting the
temperature
Fig. "
The temperature can be set from
+2 °C to +8 °C.
Keep pressing temperature setting
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on the
temperature display 4.

Alarm function

Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than two minutes. Close the
door to switch off the warning signal.
Switching off the alarm
Fig. "
Press the alarm button 5 to switch off
the warning signal.
en
27