Cola VISION ERMETICA Manuel D'installation, D'utilisation Et D'entretien page 48

6 MAINTENANCE
6.1 Introduction
Operations on the internal parts of the stove must be carried out by qualified personnel. Contact the nearest
authorised service centre.
Make sure the stove is unplugged and cold before carrying out any work on it.
6.2 Removing the cladding
6.3 Stove internal parts
Exploded view of VISION ERMETICA stove combustion chamber and parts
Key:
1 - Top cover steel
2 - Pellet hopper cover
3 - Rear Panel
4 - Protection motor
5 - Lateral panel right
6 - Lateral panel left
Key:
1 - Combustion chamber
2 - Support boundary
3 - Cast iron exchanger
4 - Vermiculite side walls
5 - Vermiculite upper baffle
6 - Vermiculite rear wall
48 VISION ERMETICA