Sony VPL-SW536 Guide De Référence Rapide page 35

Selecting the Menu Language
The factory setting for the language for displaying menus, messages, etc. is English.
To change the on-screen language, proceed as follows:
1
2
3
1
Plug in the AC power cord into a wall
outlet.
2
Turn on the projector.
Press the ? / 1 key.
3
Press the MENU key to display the
menu.
If the display cannot be properly seen,
adjust the focus, size, and position of the
projected image (page 14)
4
Select the menu language.
Press the V or v key to select the
1
Operation (
the ENTER key.
Press the V or v key to select
2
"Language (
ENTER key.
.
) menu then press
)" then press the
Operation
Language
Status
Security Lock
Panel Key Lock
Sel Set
Press the V/v/B/b key to select a
3
language, then press the ENTER
key.
5
Press the MENU key to turn off the
menu screen.
Selecting the Menu Language
English
OnStatus OnStatus
Off
Off
Back
11
GB