Kenwood NEXEDGE NX-720 Mode D'emploi page 19

• In Selcall List Mode, press and hold the S or
Input mode. Press the
rotate the Selector to change the Code Up or Down. Or, you can enter the Code
directly by using the microphone DTMF keypad.
6 Press the key programmed as [Call 1] to [Call 6] to initiate the call.
■ Receiving
A calling ID or text message will appear when a Status call is received. Press any key
to return to normal operation.
/ key to select the digit you want to change, then
key for 1 second to enter Manual
13