AEG KFA58DKM Notice D'utilisation page 49

8.3 Connection cable
• The hob is supplied with a connection
cable.
• To replace the damaged mains cable
use the following (or higher) mains
cable type: H05V2V2-F T min 90°C.
Speak to your local Service Centre.
8.5 Assembly
min.
500mm
8.4 Electrical connection
Install the hob with a socket supply line.
If there is no socket supply line, the fixed
home electrical system must include an
isolating device with at least a 3 mm-
contact separation to enable a
simultaneous and all-pole cut off from
the mains (according to NIN SEV 1000).
min.
50mm
min.
55mm
min.
28 mm
R 5mm
+1
+1
490 mm
560 mm
min.
20 mm
ENGLISH 49
min.
12 mm