switel BCC 59 Mode D'emploi page 38

Settings
Use ▲ and ▼ to adjust the alarm volume and press OK and the Menu key.
Select Set Interval and press OK.
Use ▲ and ▼ to adjust the hour and press OK.
Use ▲ and ▼ to adjust the minute and press OK.
Select another menu item or leave the menu by pressing the Menu key.
Temperature
Press the Menu key.
Select Temperature and press OK.
Select Set Range and press OK.
Use ▲ and ▼ to adjust the upper limit (Up Limit) and press OK.
Use ▲ and ▼ to adjust the lower limit (Low Limit) and press OK.
Select Temp. Alert and press OK.
- If the function is switched on (bell icon on the display) Off? is shown.
To switch the function off press OK.
- If the function is switched off On? is shown.
To switch the function on press OK.
or
Use ▲ and ▼ to select Volume and press OK.
Use ▲ and ▼ to adjust the alarm volume and press OK and the Menu key.
Press ▲ or ▼ to change the temperature unit (degrees Celsius or Fahrenheit).
- If "Celsius" is set, Degree F? is shown. To set to "Fahrenheit" press OK.
- If "Fahrenheit" is set, Degree C? is shown. To set to "Celsius" press OK.
Select another menu item or leave the menu by pressing the Menu key.
Vibrating alert
a
Note: You can set your parent unit to vibrate should the noise levels in your baby's room
reach the sensitivity of the sound sensor.
Press the Menu key.
Select Vibration and press OK.
- If the function is switched on Off? is shown.
To switch the function off press OK.
- If the function is switched off On? is shown.
To switch the function on press OK.
Select another menu item or leave the menu by pressing the Menu key.
36