Maytag MHW7100D Guide D'utilisation Et D'entretien page 11

8.
Select CYCLE*
Appearance may vary.
Turn cycle knob to select your wash cycle. See "Cycle Guide" for
details on cycle features.
9.
Adjust settings, if desired*
Appearance may vary.
The display will show the default settings for the selected cycle.
To adjust a setting, touch its name – Temperature, Soil Level, or
Spin Speed. Adjusting settings will change the Estimated Cycle
Time. Tightly packing the load, unbalanced loads, or excessive
suds may also cause the washer to increase the cycle time.
10.
Select any additional options*
Appearance may vary.
To add an option to the cycle, touch its name – Fresh Hold/Fresh
Spin, Steam for Stains, Extra Rinse, Cycle Signal, or Control Lock.
To remove an option from the selected cycle, touch the option
again.
11.
Setting a delayed start
If you do not want to begin a cycle immediately, you may choose
the DELAY START option. This will delay the start of the wash
cycle by 9 to 12 hours.
To set a delayed start:
1. Touch DELAY START + and – buttons to set the desired delay
time.
2. Touch and hold START to set the delay. The delay countdown
has started when the START light stops blinking.
* Not all options and settings are available with all cycles.
See "Cycle Guide" for available options and settings.
11