Chapter 5:
Sound
Adjustment
Adjusting the Sound
Selecting the Audio
Emphasis
Adjusting the Audio
Emphasis
Making a Personal Audio
Emphasis File
(personal file)
EN
24
Chapter 5: Sound Adjustment
Adjusting the Sound
To fully enjoy the sound coming from your
stereo system, make the following audio
adjustments. See the following sections for
additional sound adjustments.
POWER m ON
DBFB GROOVE
VOLUME
To adjust the volume
Turn VOLUME on the unit or press
VOL (+/–) on the remote.
To reinforce bass
Press DBFB* repeatedly until "DBFB
or "DBFB
" appears in the display.
"DBFB
" is more effective than "
DBFB
" .
display off n DBFB
n DBFB
* DBFB = Dynamic Bass Feedback
If you use the DBFB System with the
graphic equalizer
If the bass is too strong, the music will
sound distorted. Adjust the bass slowly
while listening to music so that you can
monitor the effect of the adjustment.
To get a powerful sound (GROOVE)
Press GROOVE.
The volume switches to power mode, DBFB
is automatically set to full strength, the
equalizer curve changes, and the
"GROOVE" button lights up. Press
GROOVE again to return to the previous
volume.
Notes
•Cancelling GROOVE does not cancel the
DBFB level or equalizer curve.
To cancel the DBFB level, press DBFB
repeatedly until "DBFB
"DBFB
" disappears from the display.
Adjust the equalization to obtain the effect
you desire.
•The sound may be distorted with DBFB or
GROOVE activated when connecting an
optional super woofer (Sony SA-W10G,
etc.) to the unit.
In this case, set DBFB off and adjust the
sound of a super woofer.
To listen through the headphones
Connect the headphones to PHONES jack.
No sound will come from the speakers.
Selecting The Audio
Emphasis
Your stereo system is provided with 20
different preset effects (music menu)
created from different graphic equalizer
and surround effect settings.
With the press of a single button, you can
VOL+/–
choose between a variety of effects
according to musical genre or use. The
personal file function (see "Making a
Personal Audio Emphasis File (personal
file)") lets you store your own effects.
POWER m ON
1
"
1
1
Press one of the MENU buttons (or
MUSIC MENU 4 /$ on the remote) to
select a MENU.
" or
EFFECT ON/OFF
3
2
MUSIC MENU
ON/OFF
2