Removing A Memory Upgrade Module - Fujitsu LIFEBOOK S752 Guide D'utilisation

Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and into
6
the connector until it lodges under the retaining clip. You'll hear a click when it is properly in place.
Replace the cover and reinstall the screws.
7
T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK
PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY CAPACITY

Removing a Memory Upgrade Module

Perform steps 1 through 3 of Installing a Memory Upgrade Module.
1
Pull the clips sideways away from each side of the memory upgrade module at the same time.
2
While holding the clips out, remove the module from the slot by lifting it up and pulling it away from your
3
notebook.(Figure 25)
Store the memory upgrade module in a static guarded sleeve.
4
Replace the cover and reinstall the screws.
5
Figure 23. Opening Memory Compartment
74
.
. O ,
NCE IT IS INSTALLED YOU CAN LEAVE IT IN