Removing A Memory Upgrade Module; Checking The Memory Capacity - Fujitsu LIFEBOOK LH531 Guide D'utilisation

Alignment Keys
Retaining Clips
Figure 29. Installing memory module

Removing a Memory Upgrade Module

1
Perform steps 1 through 4 of Installing a Memory Upgrade Module.
2
Pull the clips sideways away from each side of the memory upgrade module at the same time.
3
While holding the clips out, remove the module from the slot by lifting it up and pulling it away from your
notebook. (Figure 30)
4
Store the memory upgrade module in a static guarded sleeve.
5
Replace the cover and reinstall the screws.

Checking the Memory Capacity

Once you have changed the system memory capacity by replacing the installed module with a larger one,
be sure to check that your notebook has recognized the change.
Retaining Clip
61 - Memory Upgrade Module
Retaining Clip
Figure 30. Removing memory module