Checking The Memory Capacity - Fujitsu LIFEBOOK S752 Guide D'utilisation

Retaining Clip
Figure 24. Inserting a Memory Module

Checking the Memory Capacity

Once you have changed the system memory capacity by replacing the installed module with a larger one, be sure to
check that your notebook has recognized the change.
Check the memory capacity by doing the following: from Modern Start screen press [Windows]+[X], then select
Control Panel > System. The amount of memory is displayed next to Installed Memory (RAM): The amount of
memory displayed should be approximately the total of all memory modules installed. There may be a discrepancy
which is allocated for fixed video memory.
I
F THE TOTAL MEMORY DISPLAYED IS INCORRECT
PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT CORRECTLY RECOGNIZED
2
1
Alignment Key
1
,
CHECK THAT YOUR MEMORY UPGRADE MODULE IS PROPERLY INSTALLED
,
SEE
75
3
2
Figure 25. Removing a Memory Module
T 84
ROUBLESHOOTING ON PAGE
1
. (I
F THE MODULE IS
.