Removing A Memory Upgrade Module - Fujitsu LIFEBOOK AH531 Mode D'emploi

Alignment Keys
Retaining Clips
Figure 31. Installing memory module

Removing a Memory Upgrade Module

1
Perform steps 1 through 4 of Installing a Memory Upgrade Module.
2
Pull the clips sideways away from each side of the memory upgrade module at the same time.
3
While holding the clips out, remove the module from the slot by lifting it up and pulling it away from your
notebook. (Figure 32)
4
Store the memory upgrade module in a static guarded sleeve.
5
Replace the cover and reinstall the screws.
Retaining Clip
66 - Memory Upgrade Module
Retaining Clip
Figure 32. Removing memory module