Device Ports
Your Fujitsu LIFEBOOK notebook and the optional Port Replicator come equipped with multiple ports to which you can
connect external devices including disk drives, keyboards, printers, etc.
Internal LAN (RJ-45) Jack
The internal LAN (RJ-45) jack is used for a Gigabit (10Base-T/
100Base-Tx/1000Base-T) Ethernet LAN connection. You may
need to configure your notebook to work with your particular
network. (Contact your network administrator for
information on your network configuration.) To connect the
LAN cable follow these easy steps:
Align the connector with the port opening.
1
Push the connector into the port until it is seated.
2
Plug the other end of the cable into a LAN outlet.
3
Figure 27. Connecting a USB Device
Universal Serial Bus Ports
The Universal Serial Bus ports (USB) allow you to connect USB devices
such as external game pads, pointing devices, keyboards and/or
speakers. There are four USB ports on your notebook: two USB 2.0 ports
on the right side and two USB 3.0 ports on the left (one of them shares
the e-SATA port). Note that the bottom USB 2.0 port is also a USB
Anytime Charge port (see section below for more information).
To connect a USB device follow these steps:
Align the connector with the port opening.
1
Push the connector into the port until it is seated.
2
76
1
Figure 26. Connecting the LAN
2