LENCO BT-130 Guide D'utilisation page 9

OTS80 BK3254 BT_AUX_20170919_r0_draft for MK
F. Auto re-connect with paired device and New pairing
1. Every time you turn On the Bluetooth speaker power; it will firstly
searching for the mobile device, which has paired previously and still
in record. The Bluetooth Speaker will re-connect this mobile device as
priority if it is in Bluetooth searching device mode and connection
range.
2. If not found in some seconds, the Bluetooth Speaker then will turn
into new pairing mode internally.
3. Now you can process for new mobile device to pair. (refer to item
D.2~D.5 methods mentioned above)
G. Switch to new pairing from connected mode
1. In Bluetooth connected mode, you can switch the Bluetooth Speaker
into Bluetooth searching/pairing mode for paring with the new
device at any time you desired;
2. Press and hold the " /
the "MODE Indicator (1)" will switch to rapidly flash blue from
connected mode.
3. Now you can process for new mobile device pair. (refer to item
D.2~D.5 methods mentioned above)
H. Bluetooth Music Playing Control Function
1. In playing music, press the " /
music. To resume press it again.
2. Press and hold the "
3. Press and hold the "
4. When maximum or minimum volume is reached, a beep sound will
heard.
5. Press once the "
6. Press once the "
I. Hand Free Function
1. When there is an incoming call during Bluetooth music playing mode;
2. The ringing sound will up and the playing music will pause automatically.
(6)" button until a series of tones sound,
(7)" button to increase the volume level.
(5)" button to decrease the volume level.
(7)" button to go to next music.
(5)" button to go to previous music.
9
(6)" button to pause the playing