Télécharger Imprimer la page

Coleman 5442 Serie Mode D'emploi page 4

Masquer les pouces Voir aussi pour 5442 Serie:

Publicité

Les langues disponibles

Les langues disponibles

To Set Up
DANGER
• CARBON MONOXIDE HAZARD
• For outdoor use only.
• Never use inside house, camper, tent, vehicle
or other unventilated or enclosed areas. This
stove consumes air (oxygen). Do not use in
unventilated or enclosed areas to avoid
endangering your life.
NOTE: Use Coleman® 16.4 oz. disposable propane
cylinders. The LP-gas cylinder(s) used with stoves
must be constructed and marked in accordance
with the specifications for LP-gas cylinders of the
U.S. Department of Transportation or Transport
Canada, CAN/CSA B339 .
CONSUMER NOTICE: These assembly
instructions are designed for more than
one stove model. Features shown MAY
NOT be in your stove and will not be
provided by this company or at the place
you purchased your stove.
■ Remove components from carton. (Fig. 1)
■ See carton for parts included with your unit.
■ To open the stove,
pull the latch release
located on the
handle. (Fig. 2)
■ Open the stove and place on a flat and level
surface. Install pot supports as shown. (Fig. 3)
■ Close both burner valves firmly. (Fig. 4)
• Keep all connections and fittings clean.
Inspect propane cylinder and stove propane
connections for damage before attaching.
• During set up, check all connections and
fittings for leaks using soapy water. Bubbles
indicate a leak. Never use a flame.
■ Screw regulator into stove hand tight. (Fig. 5)
Fig. 1
■ Remove plastic cap from top of propane bottle and
screw propane bottle into regulator hand tight. (Fig. 6)
Fig. 2
English-3
CAUTION
• SERVICE SAFETY
Fig. 5
Fig. 3
Fig. 4
Fig. 6

Publicité

loading