60 www.electrolux.com
Programme
6
7
8
9
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.
5. OPTIONS
Activate or deactivate the options
before the start of a programme.
You cannot activate or deactivate
the options while a programme
operates.
If one or more options are set,
make sure that the related indica-
tors are on before the programme
starts.
5.1 ExtraHygiene
With this option you have better hygiene
results. During the rinsing phase, the tem-
perature stays at 70 °C for at least 10 mi-
nutes.
How to activate the ExtraHygiene
option
1. Press ExtraHygiene. The related indi-
cator comes on. In the display you can
see the update of the programme du-
ration.
• If the option is not applicable to the
programme, the related indicator
flashes quickly 3 times and then
goes off.
1)
Duration
(min)
50 - 60
130 - 140
70 - 80
14
Energy
(kWh)
1.0 - 1.1
1.3 - 1.5
0,8 - 0,9
0.1
5.2 ProBoost
This option increases the water pressure
in the prewash and washing phases by
40%. The washing results are very good
also with heavy soiled loads.
How to activate the ProBoost option
1. Press ProBoost. The related indicator
comes on. In the display you can see
the update of the programme dura-
tion.
• If the option is not applicable to the
programme, the related indicator
flashes quickly 3 times and then
goes off.
5.3 Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
How to activate the Multitab option
1. Press Multitab, the related indicator
comes on.
Water
(l)
10 - 11
14 - 15
11 - 12
4