Installation; Single Search - FTE UNIVERS U7000 Manuel De L'utilisateur

OSD 43
OSD 44
OSD 45
OSD 46

INSTALLATION

4. INSTALLATION
Press [Menu] in the TV mode to enter the main menu (OSD
43).
1. Press [ ] to select the Installation item.
2. Press [OK] to enter the selected item.
In the Installation menu (OSD 44):
3. Press [ ] to select the wanted menu item.
4. Press [OK] to enter the selected item among.

- Single Search

- Multi Search
- TP Scan
- Satellite List
- TP List
- Satellite Guide
- Unicable Configuration
4.1. SINGLE SEARCH
After selecting Antenna Setup another window will be opened
(OSD 45).
You can edit the following items:
1. Satellite: Press [
enter satellite list to select directly.
2. LNB Configuration: Selecting this option and pressing [OK],
the LNB Configuration menu will be displayed (OSD 46). In this
menu, next options can be modified:
- LNB Type: Press [
"User", "Universal" and "Unicable" mode. Pressing [OK] the
frequencies will appear to be edited. Select the frequency
you want to edit and change the value with [
- 22K: Use [ ] to switch "ON" and "Off". The 22 kHz sig-
nal is used in KU Universal LNBs to change between low
band and high band. After choosing LNB type "Universal"
you cannot modify 22K.
- DiSEqC1.0: Use [
switches.
- DiSEqC1.1: Use [
switches.
- Positioner: Press [
DiSEqC1.2 / GoToX". *
* This receiver does not allow moving Diseq motors
- Polarity: Press [
- Toneburst: Press [
"Position A" or "Position B".
Once the LNB is configured, press [Menu] to save the changes
and go to the previous window to continue configuring the
antenna.
3. DiSEqC1.0: Use [
PAG. 26
] to switch Satellites or press [OK] to
] to switch among "Standard",
] to switch the options of DiSEqC
to switch the options of DiSEqC1.1
to select between "None /
] to switch between "Auto / H / V".
] to switch this function "On"
] to switch the options of DiSEqC
]