Delete All - FTE UNIVERS U7000 Manuel De L'utilisateur

OSD 41
OSD 42
CHANNEL

3.5. DELETE ALL

To delete all channels:
1. Enter the password. The default password is "0000".
2. After entering the password correct a safety question will
show up where you have to confirm first (OSD 42).
3. Select "Yes" to delete all channels or "No" to cancel and
confirm with [OK].
4. In step 2 and step 3, pressing [Exit] will exit the function
directly without saving.
? FREQUENTLY ASKED QUESTION
Q: IF I incautiously delete all channels, what should I do?
A: There are three ways to restore:
- To re-search all channels at the "Installation" menu.
- Use "Factory Default" function to restore all channels in the
"Tools" menu. The receiver will load the factory channels.
- Using the option of the tool menu "updating software" "Backup
USB".
PAG. 25