Timeshift - FTE UNIVERS U7000 Manuel De L'utilisateur

OSD 14
OSD 15
OSD 16
OSD 17
OSD 18
BASIC OPERATIONS
2.21. REC*
To start the recording (OSD 14).
If you would like to record a programme immediately, press the
Key REC. A new window will appear on the screen, where you
can select the length of the recording (from 15 to 180 minutes
in a range of 15 minutes interval).
The rest of the data that appear in this window inform you about
the recording channel, the date, the time and the free space on
the hard disk. Once the minutes length is settled, confirm again
by pressing the REC key and it will start to record.
Press [Exit] to cancel the recording.
Note: If the hard disk is full, a warning message will be shown
on the screen. Please, delete some fi les in order to be able to
record again.
Note: If during the recording, the hard disk fi lls up, the recording
stops and will only store the data recorded until that moment
(without losing the previously stored data).
In case you execute a fast recording and fixing the duration,
this will get in conflict with a timer, an alert message will be
shown in the screen. This message informs with the fi rst timer
that would be in conflict in the fast recording, and it requests
the confirmation that you want to do in the moment of the timer
(OSD 15).
- If you push again "Rec": it will keep the event programmed.
The receiver will carry out the fast recording until the moment of
the programmed event, when it will do it, obviating the selected
duration in the fast recording.
- If you push "Exit": it will make the fast recording and will
obviate the temporised events that will get in conflict. Anyway,
in the moment of the temporised event the user are inquired
again about if he wants to carry out the programmed event. In
case of no response, it will continue with the fast recording.
In order to stop a recording before the ending of the programmed
length, press the [Stop]-Key. A new window will be shown in
order to confirm the end of the recording (OSD 16). If you
press the Key [Rec], the recording will continue. Press the key
[Stop] again to end the recording manually, if you want to end
the recording before the programmed length.
2.22. TIME SHIFT*
If you are watching a program and you want to stop it and later
continue watching it, press the key [
A new window will be shown in order to confirm the Timeshift
(OSD 17). Press [Exit] to cancel the Timeshift. Confirm again
►
by pressing the [
program will stop and will be stored on the hard disk of your
receiver. The OSD will show you the time since the function is
activated (OSD 18).
PAG. 19
II
►
] on the remote control.
II
] key and it will start timeshifting. The