Technical Data; Installation - Zanussi ZBA14441SC Notice D'utilisation

At the same time,
with the fingers ex-
pand up and down
the transparent cover
and unhook it in the
direction of the ar-
rows.
Replace the lamp
with one of the same
power and shape,
specifically designed
for household appli-
ances. (the maximum
power is shown on
the light bulb cover).
Reassemble the
lamp cover.
Connect the plug to
the mains socket.
Open the door. Make
sure that the light
comes on.

Technical data

Dimension of the recess
Rising Time
Voltage
Frequency
The technical information are situated in the
rating plate on the internal left side of the ap-
pliance and in the energy label.

Installation

Caution! Read the "Safety Information"
carefully for your safety and correct
operation of the appliance before installing the
appliance.
www.zanussi.com
1
2
1
Height
Width
Depth
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "In-
stallation".
3. If necessary, replace the defective door
gaskets. Contact the Service Center.
873 mm
540 mm
549 mm
12 h
230 V
50 Hz
Positioning
This appliance should be installed in a dry,
well ventilated indoor where the ambient tem-
perature corresponds to the climate class indi-
cated on the rating plate of the appliance:
21