c) Using the kettle
The sensitive pads work with a sense of touch. It is not necessary to put pressure
on.
Press ON/OFF button to turn on the kettle
Select the desired temperature thanks to the slider: slide your finger on the line to
increase or decrease the temperature.
Once the temperature is selected, a light comes on in front of the required
temperature.
You can see the temperature rise during operation thanks to light indicators.
Once the temperature is reached, the kettle will stop heating water. You hear a beep.
At that time, two options are available to you:
-
You can use the keep warm function
two hours.
-
You can remove the kettle from its base and serve water. The kettle turns
off.
4/ CLEANING AND MAINTENANCE
a) Cleaning
Before cleaning, unplug the connection base and allow the kettle to cool down.
Clean the outside of the kettle and the connection base with a slightly damp cloth,
ensuring that the electrical components remain dry.
Do not use abrasive or degreasing agents.
To prevent particles of lime from becoming detached in the liquid, the kettle
incorporates a lime filter. To clean it, remove it by pulling upwards. Clean the filter by
rinsing it under the tap and use a soft brush to remove any lime encrusted.
The lime filter can be washed in dishwasher.
Clean the inside of the kettle with soapy water.
b) Maintenance tips
After a period of time, calcareous deposits accumulate on the inside of the kettle. An
excessive amount of lime may affect the proper functioning of the kettle. Thus, a
decalcification can be necessary:
Half fill the kettle with water and white vinegar (2 doses of water for 1 dose of
vinegar).
Boil this mixture and allow it to stand for the night.
The following day, rinse the kettle and boil water for 2 or 3 times to vanish vinegar.
If the amount of lime is excessive, use a commercially-available decalcifying solution. Never
try to decalcify the kettle by chipping away or scratching.
.
to keep the water heated during
19