Audio Settings - Kenwood KDC-168U Mode D'emploi

Pandora®
Delete a station
While listening to PANDORA...
1 Press .
2 Turn the volume knob to select [STATION DEL], then
press the knob.
3 Turn the volume knob to select [BY DATE] or [A-Z],
then press the knob.
4 Turn the volume knob to select the desired station
to delete, then press the knob.
5 Turn the volume knob to select [YES], then press
the knob.
6 Press and hold to exit.
To return to the previous setting item, press

AUDIO SETTINGS

While listening to any source...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table), then press the
knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold
To return to the previous setting item, press
(or using the remote control)
1 Press AUD to enter [AUDIO CONTROL].
Press J / K to select an item, then press
2
.
AUDIO CONTROL
SUB-W LEVEL –15 to +15 (0)
BASS LEVEL –8 to +8 (+2)
MID LEVEL –8 to +8 (+1)
TRE LEVEL –8 to +8 (+1)
EQ PRO (This setting is stored to [USER].)
BASS ADJUST BASS CTR FRQ
BASS LEVEL
BASS Q FACTOR
BASS EXTEND
MID ADJUST MID CTR FRQ
MID LEVEL
MID Q FACTOR
to exit.
.
.
Adjusts the subwoofer output level.
Adjusts the level to memorize for each source. (Before making an
adjustment, select the source you want to adjust.)
60/80/100/200: Selects the center frequency.
–8 to +8 (+2): Adjusts the level.
1.00/1.25/1.50/2.00: Adjusts the quality factor.
ON: Turns on the extended bass. ; OFF: Cancels.
0.5KHZ/1.0KHZ/1.5KHZ/2.5KHZ: Selects the center frequency.
–8 to +8 (+1): Adjusts the level.
0.75/1.00/1.25: Adjusts the quality factor.
Default: XX
11
ENGLISH