Audio Settings - Kenwood KMM-BT358 Mode D'emploi

Bluetooth®
To
Repeat play
Random play
Select a file from a folder/list
Switch between connected
Bluetooth audio devices
Listen to iPod/iPhone via Bluetooth
You can listen to the songs on the iPod/iPhone via Bluetooth on this unit.
Press B SRC repeatedly to select iPod BT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB
input terminal. (Page 9)
• If you plug in an iPod/iPhone to the USB input terminal while listening to
iPod BT source, the source automatically changes to iPod USB source.
Press B SRC to select iPod BT source if the device is still connected via
Bluetooth.
On the faceplate
Press 4 repeatedly.
[ALL REPEAT], [FILE REPEAT], [GROUP REPEAT],
[REPEAT OFF]
Press and hold 3 to select [ALL RANDOM]
or [GROUP RANDOM].
• Press 3 to select [RANDOM OFF].
Refer to "Select a file to play" on page 11.
Press 5.
(Pressing the "Play" key on the connected
device itself also causes switching of sound
output from the device.)
(for /

Audio Settings

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated.
4
Press and hold
(or using the remote control)
1
Press AUD to enter [AUDIO CONTROL].
2 Press J / K to select an item, then press ENT IW.
)
To return to the previous setting item, press
[AUDIO CONTROL]
[SUB-W LEVEL] [LEVEL –50] to [LEVEL +10] ([LEVEL 0]): Adjusts the subwoofer output
level.
[EASY EQ] Adjusts your own sound settings.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [MANUAL EQ].
[SW]: [LEVEL –50] to [LEVEL +10]
[BASS]: [LEVEL –9] to [LEVEL +9]
[MID]: [LEVEL –9] to [LEVEL +9]
[TRE]: [LEVEL –9] to [LEVEL +9]
to exit.
.
(Default: [LEVEL 0]
Default: [XX]
[LEVEL 0]
[LEVEL 0]
[LEVEL 0])
19
ENGLISH