Casing Cleaning; Decalcification; Accessories - La Pavoni EUROPICCOLA Mode D'emploi

English
- Disconnect the spout-breaker (23) from the milk-frother unit (24).
- Slip the milk suction tap (25) from the milk-frother unit (24).
- Slip the regulation bar (19) out of the tap (25).
Wash carefully everything under running water and reassemble the components.
14.3 – CASING CLEANING
Clean the outside of the machine with a damp cloth and then dry it.
Do not use alcohol or solvents, abrasives or detergents, to avoid damaging the
treated outside surfaces.
Do not place the machine in water, not even part of it.
15 – DECALCIFICATION
We recommend you to decalcify the machine depending on how often you use it and on the hardness
of the water, using a specific softeners that can be found on sale.
Prepare in a container a solution of water and softener and dissolve it in the water; subsequently pour
the solution into the boiler (9) and close the boiler cap (3).
Insert the filter-holder (5) into the unit (11) without any coffee and place the Cappuccino Automatic
device (17) in its site; then switch the machine on.
Place a container under the filter-holder and under the Cappuccino Automatic. Once the machine
has reached the operating pressure, turn the steam tap knob (4) anticlockwise and allow the water
to flow out of the Cappuccino Automatic for approximately 10-15 seconds; then close the tap again.
Subsequently lift the lever (1) upward and allow the water to flow out of the nozzles of the filter-holder
for approximately 10-15 seconds; then interrupt delivery.
Let act the solution to act for approximately 15 minutes and repeat the operations until the water has
been entirely finished.
Place the ON/OFF switch on the OFF position again and unplug the main cable from the power
socket without pulling it.
Open slowly the steam tap knob (4) by turning it anticlockwise and wait for all the steam contained
in the boiler to be discharged from the Cappuccino Automatic.
Remove the boiler cap and rinse out with clean water several times.
After having filled the boiler with fresh and clean water, having closed the boiler cap and the steam
knob, switch again the machine on and wait for it to reach the correct pressure; then allow plenty of
water to flow both out of the filter-holder nozzles, and out of the Cappuccino Automatic, to eliminate
any residual softener solution, before switching the machine off.
To remove the scale deposits from the heating element and inside the boiler, it is also possible to use
a water and vinegar solution, which should be brought to the boiling inside the boiler itself. .
Once the machine has reached the correct pressure, let work the solution for approximately 15
minutes. Place the switch on the OFF position again and unplug the main cable from the socket
without pulling it. Subsequently empty the boiler and follow the above mentioned steps to remove
any residual solution.
16 – ACCESSORIES
Drip tray with grid.
1 cup filter (or pods) 2 cups filter.
Coffee spoon for one dose of coffee.
Coffee press.
Cappuccino Automatic (optional in models with black base).
41