Connections - Sharp PN-M501 Manuel D'installation

Caution
• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting
cables. Also, read the manual of the equipment to be connected.
• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables
connected to the input and output terminals may cause malfunctions and the other problems.
Power cord
(Supplied)
For power outlet
TIPS
• Set the audio input terminal used for each input mode in AUDIO SELECT on the SETUP menu. The factory settings are
shown below.
Input mode
DisplayPort
HDMI1
HDMI2
D-SUB[RGB],
D-SUB[COMPONENT]
• SHARP Content Distributor setup program can be downloaded using Information Display Downloader.
Install Information Display Downloader.
• When the Information Display Downloader is installed, you can check and download the most recent versions of the software
programs.
• To install and use the software, see the manual for each.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks
of HDMI Licensing Administrator, Inc. in the United States and other countries.
• DisplayPort is a registered trademark of Video Electronics Standards Association.
• Adobe, Acrobat, and Acrobat Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
• Google and Android are trademarks or registered trademarks of Google LLC.
• VESA is either registered trademark or trademark of Video Electronics Standards Association in the United States and/or
other countries.
• All other brand and product names are trademarks or registered trademarks of their respective holders.
6
E
1
2 3 4 5 6
Audio input terminal (Factory setting)
DisplayPort input terminal
HDMI1 input terminal
HDMI2 input terminal
Audio input terminal

Connections

10
11
12
13
14
7 8 9
1. AC input terminal
2. DisplayPort output terminal
3. HDMI1 input terminal
4. HDMI2 input terminal
5. D-sub input terminal
6. DisplayPort input terminal
7. Audio input terminal
8. Audio output terminal
9. RS-232C input terminal
10. LAN terminal
11. USB port
12. SD card slot
13. Expansion slot
14. RS-232C output terminal