Calendar; Hdmi Input; Standby - Hama 00118572 Mode D'emploi

7.4 Calendar

In the main menu, use the cursor buttons ( / or t / u) to select the Calendar
option and then press ENTER on the remote control (or ► II / OK on the control
panel of the device).
• Use ◄ ◄ / / ► ► I / or
t
• In the calendar, image files located on the most recently selected storage medium will be
displayed as a slide show. If no storage medium is plugged in, the image files in the internal
storage will be displayed.
• See 7.7 System settings (setup) for information on how to change the image files located in
internal memory.
• Press EXIT or MENU to return to the previous menu or the main menu.

7.5 HDMI input

The digital picture frame can be used as a monitor or presentation medium via HDMI.
• Connect your HDMI-capable terminal device, e.g. a laptop computer, to the HDMI input using
an appropriate cable.
• Press SOURCE or press and hold MENU / EXIT for approx. 3 seconds, and then use the cursor
or t / u to select HDMI . Confirm the selection by pressing ENTER or ► II / OK.
buttons /
• To use the digital picture frame functions again, repeat this process and select DMP instead of
HDMI.

7.6 Standby

After 15 minutes in the main menu without any input, the device will automatically begin to
display a slide show.
The device automatically switches into standby mode if:
• it remains in the system settings menu with no input for 15 minutes
• the running time selected in the system settings under Standby mode (4/8/12 hours) has
elapsed
• no AV or HDMI video input signal is detected for 5 minutes
Note – Standby
• Before the device automatically switches into standby mode, a notification will appear on
the screen.
• When this happens, press EXIT to cancel standby mode.
• Press the button on the device or on the remote control to turn the device back on.
/ / / to navigate in the calendar.
u p q
GB
15