Publicité
Les langues disponibles
Les langues disponibles
Lumbar Support
6
With the individually adjustable lumbar support you can adapt the curvature
in the area of the lumbar lordosis. Adjust the curvature roughly at the height
of the belt so that your lumbar spine receives optimal support.
Adjustment of Lumbar Support to Shape of Back
Operating the rotary control
6
ture of the spine. Operating backward reduces the curvature of the spine.
Adjustment of Lumbar Support to Height
While noticing resistance from the catches, pull the rotary control
and adjust the height of the curvature by operating the rotary control for-
ward or backward.
6
at the backrest forward increases the curva-
english | 22
TrainBackMatic (Synchronous Mechanism)
The TrainBackMatic responds to the backrest pressure and automatically syn-
chronizes seat and backrest for a physically beneficial motion sequence. Try
to adjust the backrest pressure level so that you never feel to have to apply
too much force to lean back. In this way, you motivate yourself to change your
sitting position frequently; thus, promoting positive lumbar effects.
Adjustment of Backrest Tilt: Individually or with Permanent Contact
While sitting, pull the operating element
your movements. As soon as you release the lever, the backrest is fixed. You
outward
can activate the permanent-contact mechanism by pulling the operating
6
element
7a
Individually Adapted Back Pressure
While sitting, pull the operating element
ward so that you can adjust the back of the seat`s tilt. Turn the hand wheel
, which is located in the middle under the seat surface, clockwise to in-
7b
crease the back pressure. Meanwhile, turning the hand wheel counterclock-
wise decreases the back pressure.
7a
upward and subsequently pushing it backward.
upward and then push back-
7a
7a
7b
english | 23
7
upward. The backrest follows
Publicité
