Adjustment of Seat Depth
4
4
The adjustment of the seat depth helps you to adjust the seat surface to the
length of your upper leg. Make sure that the front edge of the seat is at a
distance of six inches from the hollow part of the knee.
Individually Adjusted Seat Surface
While sitting, pull the operating element
pushing the seat cushion forward and backward until the desired position is
reached. Then release the operating element when complete.
upward, while simultaneously
4
4
english | 24
Arm, Height adjustable (1F)
To relieve the strain on shoulders and neck, the arms can be adjusted in
height. Adapt the height so that you do not feel any tension in the shoul-
der area.
Adjustment of Arm in Height
Push the operating element
, adjust the arms to the desired height, and
5
then release the operating element.
(The arms can also be adjusted to the desired width. The armrest supports are located at the bottom
of the seat cushion. Loosen the two visible screws and adjust the width. To achieve a wider setting,
adjust the arms to the outermost hole of the threaded bushes and then tighten the screws firmly.)
5
english | 25
5
5