Before Calling Your After Sales Service - Electrolux LUT7NE28W1 Guide D'utilisation

PART - 6.

BEFORE CALLING YOUR AFTER SALES SERVICE

Errors
Your freezer will warn you if the temperatures for the
problem occurs with the appliance. Warning codes are displayed in the
ERROR TYPE
E01
E02
E03
E06
E07
E08
E09
If you are experiencing a problem with your freezer, please check the following before
contacting the after-sales service.
Your freezer is not operating
Check if:
• There is power
• The plug is correctly placed in the socket
• The plug fuse or the mains fuse has blown
• The socket is faulty. Examine this by plugging your freezer into a working socket.
MEANING
Sensor warning
Low Voltage
Warning
Freezer
compartment is not
cold enough
freezer
WHY
Power supply to the
device has dropped to
below 170 V.
Likely to occur after
long term power failure.
EN - 19 -
are at improper levels or if a
freezer indicators.
WHAT TO DO
Call Service for assistance as
soon as possible.
- This is not a device failure, this
error helps to prevent damages
to the compressor.
- The voltage needs to be
increased back to required
levels
If this warning continues an
authorised technician needs
to be contacted.
1. Set the freezer temperature
to a colder value or set Super
Freeze. This should remove
the error code once the
required temperature has been
reached. Keep doors closed
to improve time taken to reach
the correct temperature.
2. Remove any products which
have thawed/defrosted during
this error. They can be used
within a short period of time.
3. Do not add any fresh produce
to the freezer compartment
until the correct temperature
has been reached and the
error is no longer.
If this warning continues an
authorised technician needs
to be contacted.