Hands-Free Phone Control - Alpine X903D Guide De Référence Rapide

Hands-Free Phone Control

The unit can connect with up to two hands-free phones.
If you connect two hands-free phones to the unit, select "Hands-free Device Priority" in "Bluetooth Setup" to set the
order of precedence. For details, refer to OWNER'S MANUAL in the AUDIO VISUAL SECTION (CD-ROM).
How to connect to a Bluetooth
compatible device (Pairing)
1
Touch [Setup] button on the Menu screen.
[Setup] button
2
Touch [Bluetooth].
• Make sure the "Bluetooth" setting is "On" ( ).
3
Touch [Set Bluetooth Device].
4
Touch [ ] to search for a new device.
5
Touch [ ] (Audio), [
[ ] (Both) for the device you want to
connect from the list.
Audio: Sets for use as an Audio device.
Hands-free: Sets for use as a Hands Free Device.
Both: Sets for use as both an Audio device
and Hands Free Device.
6
When the device registration is complete, a
message appears and the device returns to
normal mode.
Owner's manual
• You can register up to 5 Bluetooth compatible mobile
• The Bluetooth registration process differs depending on
Answering a Call
1
2
] (Hands-free) or
Hanging up the Telephone
1
Bluetooth Setup, Bluetooth Operation
phones.
the device version and SSP (Simple Secure Pairing). If a 4
or 6 character Passcode appears on this device, enter the
Passcode using the Bluetooth compatible device.
If a 6 character Passkey appears on this device, make
sure the same passkey is displayed on the Bluetooth
compatible device and touch "Yes. "
An incoming call triggers the ringtone and
an incoming call display.
Incoming call notification screen
Touch incoming call notification screen.
The call starts.
Call info area
Touch the call info area during a call changes to the
Phone Operation screen. Use this screen to adjust
the speech volume, etc.
Touch [ ] (End Call).
The call finishes.
13
-EN