GreenWorks Tools 2505607 Manuel D'utilisation page 7

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
Make sure it is installed with the curved ends
pointing up toward the mower deck and not down
toward the ground. When seated properly, the
blade should be flat against the fan.
■ Thread the blade bolt on the shaft and finger tighten.
■ Torque the blade bolt down clockwise using a
torque wrench (not provided) to ensure the bolt is
properly tightened. The recommended torque for
the blade bolt is 62.5~71.5 kgfcm (350-400 in.-lb.).
VERTICAL STORAGE FUNCTION
See figure 13.
■ Remove the battery from the mower.
■ Remove the grass catcher bag.
■ Rotate the handle knobs to the unlocked position.
■ Lower the handle assembly and rotate the handle
knobs to the locked position.
Lift the mower by the front end to the vertical position.
Always remove the battery from the mower before
placing the unit in the vertical storage position.
STORAGE SWITCH
When the handle is rotated into the fully locked storage
position, the mower is equipped with a storage switch
that will disable the mower from running in the storage
position. The storage switch does not replace the
need to remove the safety key and battery to prevent
accidental start-up or unauthorized use.
English (Original Instructions)
WARNING
6