Unold 18715 Mode D'emploi page 20

DE
5. Close the lid until it clicks into place. The locking prevents accidental open-
ing.
EN
6. Place the kettle level on the base in order to establish the contact with the
power connection.
FR
7. Switch on the appliance by pressing the switch on lower side of the ket-
NL
tle downward. If the kettle is not correctly seated the appliance cannot be
switched on.
IT
8. Whenever you take the kettle off the base, the appliance is automatically
ES
switched off, even if the water is not yet boiling.
9. The kettle automatically stops heating at the latest when the water boils.
PL
10. ATTENTION:
The automatic switch-off only works, if the lid is correctly closed.
11. Of course you may also push the switch into the „O"-position to interrupt
heating.
12. Press the button at the top of the handle to pour out water. The vacuum in
the kettle will be released and the water can be poured out.
13. Note: Thanks to the vacuum between the inner and outer wall of the kettle
water that has been brought to boil in the container will stay hot longer (for
approx. 6 hours at 55 °C).
20 von 64
Copyright UNOLD AG | www.unold.de
14. CAUTION!
Ensure that the kettle is switched off before
removing it from the base.
15. Please allow the product to cool down for a cer-
tain time before using the kettle again to heat
water.
16. The kettle is fitted with a dry-operation cutout
that switches off the heating elements when
they become too hot, for instance when the
kettle has boiled dry. Allow the kettle to cool
down. Then fill the kettle with cold water. This
will reset the cutout so that the kettle can be
used again.
Stand 4.2.2020