Publicité
4-12. Battery Charging (/BAT) option
An option model for battery charging operation is available. It comes in two output voltages namely; 24V & 48V
with ex-factory setting of 29V & 58V respectively.
However, in conjunction with the Vadj and PV functions, the output voltage can be set to the range shown on the
charts below.
24/BAT should be used to charge 24V battery while 48/BAT should be used to charge 48V battery.
Battery charging (Constant Current) is applicable for valid output voltage range. The unit may hiccup below this
voltage range.
Connection method
8
TDK-Lambda
GWS 2
Series
50
INSTRUCTION MANUAL
Publicité
