Publicité
2-2.
CN1 Connector Pin Configuration and Function
CN1 Connector, Housing and Terminal Pins
PART DESCRIPTION
PIN HEADER
SOCKET HOUSING
TERMINAL PINS
HAND CRIMPING TOOL
Pin
Configuration
Function
No.
1
DC_OK
DC_OK signal is an open collector output signal, refer-
enced to pin2 (COM). As the output voltage drops,
DC_OK signal will output "High".
2
COM
Return loop for DC_OK signal.
3
5VSB
Auxiliary voltage output, 4.75~5.25V, referenced to
pin4 (COM). The maximum load current is 0.3A. This
output is not controlled by the remote ON/OFF control.
4
COM
Return loop for 5VSB signal.
5
CNT+
Remote ON/OFF control terminal
(When CNT+ is pulled to TTL low, power supply unit
turns ON. Otherwise, it turns OFF)
6
CNT-
Return loop for CNT+ signal
7
PV
Output voltage external control terminal
8
COM
Return loop for PV signal.
PART NAME
S8B-PHDSS(LF)(SN)
PHDR-8VS
SPHD-001T-P0.5 OR
SPHD-002T-P0.5
YRS-620 (SPHD-002T-P0.5) OR
YC-610R (SPHD-001T-P0.5)
Hand Crimp Tool for Milli-Grid
and
MicroBlade Crimp Terminals
2
TDK-Lambda
GWS 2
Series
50
INSTRUCTION MANUAL
MANUFACTURER
JST
JST
JST
JST
Publicité
