TDK-Lambda WMM30 Mode D'emploi

WMM30 Product HANDBOOK
General Safety Instructions:
READ SAFETY INSTRUCTIONS
Servicing:
These products are not customer serviceable. TDK-Lambda UK LTD. and their authorised agents only are
permitted to carry out repairs.
Critical Components:
These products are not authorised for use as critical components in nuclear control systems, life support
systems or equipment for use in hazardous environments without the express written approval of the
Managing Director of TDK-Lambda EMEA.
Product Usage:
This product is a component power supply considered apparatus and is only to be installed by qualified
persons within other equipment and must not be operated as a stand-alone product. This product is for sale to
business to business customers and can be obtained via distribution channels. It is not intended for sale to
end users.
This product is considered to be apparatus and complies with the EMC directive. The EMC performance of a
component power supply will be affected by the final installation, compliance to the stated EMC standards
and conformance to the EMC Directive must be confirmed after installation by the final equipment
manufacturer.
For guidance with respect to test conditions please visit our website at emea.tdk-lambda.com/EMC guidance
or contact your local TDK-Lambda sales office.
Environmental:
These products are IP21 construction, and therefore chemicals/solvents, cleaning agents and other liquids
must not be used.
Environment:
This power supply is a switch mode power supply for use in applications within a Pollution Degree 2,
overvoltage category II environment. Material Group IIIb PCB's are used within it.
Output Loading:
The output power taken from the power supply must not exceed the rating stated on the power supply label,
except as stated in the product limitations in this handbook.
Input Parameters:
This product must be operated within the input parameters stated in the product limitations in this handbook.
End of Life Disposal:
The unit contains components that require special disposal. Make sure that the unit is properly disposed of at
the end of its service life and in accordance with local regulations.
RISK OF ELECTRIC SHOCK
High Voltage Warning:
Dangerous voltages are present within the power supply. Under no circumstances can the power supply be
opened.
This product must be reliably earthed and professionally installed in accordance with the prevailing local
electrical wiring regulations and safety standards.
An internal fuse protects the unit and must not be replaced by the user. In case of internal defect, the unit
must be returned to TDK-Lambda UK LTD or one of their authorised agents.
Page 1 of 16 260676 issue 1, June 2020