Table des Matières
Publicité
Liens rapides
QM5 AND QS5 HANDBOOK
General Safety Instructions:
READ SAFETY INSTRUCTIONS
Servicing:
These products are not customer serviceable. TDK-Lambda UK LTD. and their authorised agents only are
permitted to carry out repairs.
Critical Components:
These products are not authorised for use as critical components in nuclear control systems, life support
systems or equipment for use in hazardous environments without the express written approval of the
Managing Director of TDK-Lambda EMEA.
Product Usage:
These products are designed for use within a host equipment which restricts access to authorised competent
personnel.
This product is a component power supply and is only to be installed by qualified persons within other
equipment and must not be operated as a stand-alone product.
This product is for sale to business to business customers and can be obtained via distribution channels.
It is not intended for sale to end users.
This product is a component power supply and does not fall within the scope of the EMC directive.
Compliance with the EMC directive must be considered in the final installation. Please contact your local
TDK-Lambda office
Environmental:
These products are IPX0, and therefore chemicals/solvents, cleaning agents and other liquids must not be
used.
Environment:
This power supply is a switch mode power supply for use in applications within a Pollution Degree 2,
overvoltage category II environment. Material Group IIIb PCB's are used within it.
Output Loading:
The output power taken from the power supply must not exceed the rating stated on the power supply label,
except as stated in the product limitations in this handbook.
Input Parameters:
This product must be operated within the input parameters stated in the product limitations in this handbook.
End of Life Disposal:
The unit contains components that require special disposal. Make sure that the unit is properly disposed of at
the end of its service life and in accordance with local regulations.
RISK OF ELECTRIC SHOCK
High Voltage Warning:
Dangerous voltages are present within the power supply. The professional installer must protect service
personnel from inadvertent contact with these dangerous voltages in the end equipment.
Page 1 of 37
260362-07, Mar 2020
Publicité
Table des Matières
Manuels Connexes pour TDK-Lambda QM5
Sommaire des Matières pour TDK-Lambda QM5
- Page 1 General Safety Instructions: READ SAFETY INSTRUCTIONS Servicing: These products are not customer serviceable. TDK-Lambda UK LTD. and their authorised agents only are permitted to carry out repairs. Critical Components: These products are not authorised for use as critical components in nuclear control systems, life support systems or equipment for use in hazardous environments without the express written approval of the Managing Director of TDK-Lambda EMEA.
-
Page 2: Hot Surface
An internal fuse protects the unit and must not be replaced by the user. In case of internal defect, the unit must be returned to TDK-Lambda UK LTD or one of their authorised agents. A suitable mechanical, electrical and fire enclosure must be provided by the end use equipment for mechanical, electric shock and fire hazard protection. -
Page 3: Gefahr Durch Elektrischen Schlag
Allgemeine Sicherheitsvorschriften: LESEN SIE DIE SICHERHEITSVORSCHRIFTEN Wartung: Diese Produkte können nicht durch den Kunden gewartet werden. Nur TDK-Lambda UK LTD. und deren zugelassene Vertriebshändler sind zur Durchführung von Reparaturen berechtigt. Kritische Komponenten: Diese Produkte sind nicht für die Verwendung als kritische Komponenten in nuklearen Kontrollsystemen, Lebenserhaltungssystemen oder Geräten in gefährlichen Umgebungen geeignet, sofern dies nicht... - Page 4 Produkt auf Erdschluss geprüft werden. Eine interne Sicherung schützt das Gerät und darf durch den Benutzer nicht ausgetauscht werden. Im Fall von internen Defekten muss das Gerät an TDK-Lambda UK LTD oder einen der autorisierten Vertriebshändler zurückgeschickt werden.
-
Page 5: Lire Les Consignes De Securite
Consignes générales de sécurité: LIRE LES CONSIGNES DE SECURITE Entretien: Ces produits ne peuvent pas être réparés par l’utilisateur. Seuls, TDK-Lambda UK LTD et ses agents agréés sont autorisés à effectuer des réparations. Composants critiques: Ces produits ne doivent pas être utilisés en tant que composants critiques dans des systèmes de commande nucléaire, dans des systèmes de sauvetage ou dans des équipements utilisés dans des environnements... -
Page 6: Surface Chaude
Un fusible interne protège le module et ne doit pas être remplacé par l'utilisateur. En cas de défaut interne, le module doit être renvoyé à TDK-Lambda UK LTD ou l'un de ses agents agréés. Une enceinte appropriée doit être prévue par l'utilisateur final pour assurer la protection contre les chocs mécaniques, les chocs électriques et l'incendie. - Page 7 Questo alimentatore è da considerarsi come un componente e come tale non è assogettato dagli scopi della direttiva EMC. Conformità alla direttiva EMC deve essere considerata nell'installazione finale di utilizzo. Gli uffici di TDK-Lambda Sas Succursale Italiana sono a vostra disposizione per ulteriori ragguagli. Condizioni ambientali: Questi prodotti sono classificati come IPX0, dunque non devono essere utilizzati sostanze chimiche/solventi, prodotti per la pulizia o liquidi di altra natura.
- Page 8 Un fusibile interno protegge l'unità e non deve essere sostituito dall'utente. Nell'eventualità di un difetto interno, restituire l'unità a TDK-Lambda UK LTD o a uno dei suoi agenti autorizzati. L'apparecchiatura finale deve includere una recinzione meccanica, elettrica e antincendio per proteggere dai pericoli di natura meccanica, dalle scosse elettriche e dai pericoli di incendio.
- Page 9 Instrucciones generales de seguridad: LEA LAS INSTRUCCIONES DE SEGURIDAD Servicio: Estos productos no pueden ser reparados por los clientes. TDK-Lambda UK LTD. y sus agentes autorizados son los únicos que pueden llevar a cabo las reparaciones. Componentes fundamentales: Estos productos no pueden ser utilizados como componentes fundamentales en sistemas de control nuclear, sistemas de soporte vital o equipos a utilizar en entornos peligrosos sin el consentimiento expreso por escrito del Director General de TDK-Lambda EMEA.
- Page 10 Un fusible interno protege la unidad y este no debe ser nunca reemplazado por el usuario. En caso de existir algún defecto interno, la unidad debe ser enviada a TDK-Lambda UK LTD o a uno de sus agentes autorizados.
-
Page 11: Risco De Choque Eléctrico
Instruções gerais de segurança: LEIA AS INSTRUÇÕES DE SEGURANÇA Manutenção: Estes produtos não são podem ser submetidos a manutenção por parte do cliente. Apenas a TDK-Lambda UK LTD e os seus agentes autorizados têm permissão para realizar reparações. Componentes essenciais: Não é... - Page 12 Existe um fusível interno que protege a unidade e que não deve ser substituído pelo utilizador. Em caso de defeito interno, a unidade deve ser devolvida à TDK-Lambda UK LTD ou a um dos seus agentes autorizados. O equipamento de utilização final deve fornecer um bastidor com protecção mecânica, eléctrica e contra incêndios adequada.
-
Page 13: Special Instructions
QM5 AND QS5 HANDBOOK Special Instructions for medical applications IEC/EN 60601-1 3rd Edition ANSI/AAMI ES 60601-1 CSA C22.2 No 60601-1 These products are designed for continuous operation within an overall enclosure, and must be mounted such that access to the mains terminals is restricted. -
Page 14: Environmental Specifications
QM5 AND QS5 HANDBOOK Environmental Specifications: Description Operation Storage Indoor Temperature 0°C - +70°C (derating at 2.5%/°C above 50°C) -40°C - +70°C Humidity 5 - 95% RH, non-condensing 5 - 95% RH, non-condensing Altitude -200m - 5000m -200m - 5000m... - Page 15 = Hold Up Option: Blank for none fitted H for Extended Hold Up = Cooling: C for Customer air (not applicable to QM5 IEC Models) F for Variable speed, forward air fan. R for Variable speed, reverse air fan. = Input connector:...
- Page 16 QM5 AND QS5 HANDBOOK May be followed by: Single output modules vMcde Where: = Output voltage = Module name: SA, SB or SC = S for screw terminal output, F for faston = See letter from Module Signal Option Table = C for Industrial Leakage, omit for standard leakage (60950 &...
- Page 17 QM5 AND QS5 HANDBOOK Series combinations vYxcde Where: = Output voltage = Series output module comprising SB, SC or DH modules = Number of slots. (See Parallel and Series combinations Table below) = S for screw terminal output, F for faston = See letter from Module Signal Option Table = C for Industrial Leakage, omit for standard leakage (60950 &...
- Page 18 QM5 AND QS5 HANDBOOK QS models as described below: Unit Configuration Code: QS[Number of available slots][Hold Up Option]-[Power]-[Voltage][Output Terminal][Standby/Signals][Unit Options]-[non safety related] Number of available slots Hold Up Option Blank for none fitted, H for Extended Hold Up Power (max)
- Page 19 QM5 AND QS5 HANDBOOK Parallel and Series combinations Table Series connection number of slots. Qty of modules Name Slots Name Slots Name Slots Limitations of use: Output voltage is the combined modules voltage connected in series Module limitations apply to modules connected in series...
- Page 20 QM5 AND QS5 HANDBOOK Parallel connection number of slots Number of modules in parallel slots Name See ratings in Module output ratings table below Combined DM modules – series connected Channel 1 only. Number of Nomenclature modules outputs v1/v2/v3MC v1/v2/v3/v4MD...
- Page 21 QM5 AND QS5 HANDBOOK QM5 Output Parameters Module output ratings table. Module Note Slots Output Vout Nom Adjustment Output Output Hazardous Channel range current power energy 11.9 to 16.1 16 to 21.6 20.8 to 28.2 2.8 to 3.8 4.25 to 5.75 7 to 9.5...
- Page 22 QM5 AND QS5 HANDBOOK 48 to 52.8 12.5 15 to 16 18 to 19.2 28 to 30 19.3 5 to 5.3 12 to 12.8 24 to 25.6 48 to 51.2 5 to 5.3 12 to 12.8 1080 17 to 18.19 63.5...
- Page 23 QM5 AND QS5 HANDBOOK Component temperatures, for customer air cooled models, must be monitored in the end use application as described in the “Cooling for Unit Temperature Table” below. The following method must be used for determining the safe operation of PSUs.
- Page 24 QM5 AND QS5 HANDBOOK Q203 Secondary FET SA module Modules C202 Electrolytic Capacitors 76 (105) C209 Y Capacitors XU206 Opto-couplers Transformer Class B Primary FET XU202 Secondary FET Higher temperature limits (in brackets) may be used but product life may be reduced.
- Page 25 QM5 AND QS5 HANDBOOK OVP (% SC modules Voutmax outnom 13.2 16.8 26.4 31.2 39.6 50.4 52.8 SB modules Voutmax (% V outnom 3.63 4.62 13.2 16.8 16.5 19.8 25.2 26.4 31.2 30.8 39.2 52.8 DM modules Voutmax outmax 16.1 21.7...
- Page 26 QM5 AND QS5 HANDBOOK 62368-1: Series modules Refer to the table below for series module Energy Source Classification Module Slots Number Module ES1 (<42.4Vpk, ES2 (Anything ES3 (anything above Code Description 60Vdc) above ES1 but ES2) Outputs (Module nominal below 70.7Vpk,...
- Page 27 QM5 AND QS5 HANDBOOK Modules 48/x/x/x/x where 68/x/x/x/x connected in x can be 3.3, 5, 96/x/x/x/x series 8, 14, or 24V where x can be 3.3, 5, 8, 14, or 24V Modules All MG modules are ES3 connected in series...
-
Page 28: Output Connections
QM5 AND QS5 HANDBOOK Modules All JD modules are ES3 connected in , split series after 3rd output Modules 60/60 60/75, 60/120, 60/135, connected in 75/60, 75/75, 75/120, , split series 75/135, after 5th 120/60, 120/75, 120/120, output 120/135, 135/60, 135/75,... - Page 29 QM5 AND QS5 HANDBOOK Mechanical Outline Drawings: Customer fixing points Standard Unit Maximum torque 1.1 to 1.3Nm Page 29 of 37 260362-07, Mar 2020...
- Page 30 QM5 AND QS5 HANDBOOK IEC Connector Maximum torque 1.1 to 1.3Nm Page 30 of 37 260362-07, Mar 2020...
- Page 31 QM5 AND QS5 HANDBOOK Option Pin Outs Page 31 of 37 260362-07, Mar 2020...
- Page 32 QM5 AND QS5 HANDBOOK Secondary Option Pin Out Page 32 of 37 260362-07, Mar 2020...
- Page 33 QM5 AND QS5 HANDBOOK Page 33 of 37 260362-07, Mar 2020...
- Page 34 QM5 AND QS5 HANDBOOK Page 34 of 37 260362-07, Mar 2020...
- Page 35 QM5 AND QS5 HANDBOOK Page 35 of 37 260362-07, Mar 2020...
- Page 36 QM5 AND QS5 HANDBOOK Slot order Page 36 of 37 260362-07, Mar 2020...
- Page 37 QM5 AND QS5 HANDBOOK TDK-Lambda UK Ltd Kingsley Avenue, Ilfracombe Devon, EX34 8ES Telephone - Sales and Service +44 (0)1271 856666 Head Office and Works +44 (0)1271 856600 Facsimile +44 (0)1271 864894 WEBSITE: www.uk.tdk-lambda.com Page 37 of 37 260362-07, Mar 2020...